China Brick Reinforcement Coil A2 Stainless Steel-225mm

Product Name:

Stainless Steel Brick Reinforcement Coil-225mm

Product Description:

Produced for brick and block work reinforcement. Its primary usage is to prevent cracking. Manufactured from A2 Stainless Steel for ultimate corrosion resistance. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Ideal for brick and block masonry, this Brick Reinforcement Coil Mesh from Smart Craftsmen provides extra strength between brick courses and prevents unwanted cracks from forming for enhanced durability. With a sturdy structure of quality galvanised steel, this 20m roll of coil mesh is robust and durable, much like the support it provides.

Features & Benefits:

• 20m per roll

• Available in different widths to suit your needs

• Quality A2 stainless steel and galvanised mild steel structure

• Equipped with strength and durability

• Useful in various forms of brickwork and block masonry

• Reinforcing brick and block work

Application:

If installing the Expanded Metal Lathing to timber work for horizontal application the sheet should run across the frame work. It is recommended to use galvanised nails or staples to attach the Expanded Metal. Start at the center and work towards mid line of the sheet and towards the edge of the sheet. Nails and staples should be applied at an angle to give a better hold. For installation on to steel channels the Metal Lathing should be fixed using soft galvanised steel tying wires.